MET Group Technical provided a live energised inspection for our valued client Custodian Data Centre’s at their Maidstone & Dartford sites to meet their compliance and Electricity at Work Act legislative obligation and proving the Custodian Data engineering team have the latest technologies inspecting their electrical assets with no compromise on safety. The inspection and data collected was taken from their LV switchgear and distribution boards then recorded and analysed on

MET Group Technical are proud to have carried out a full energised inspection to the switchgear at Freeman Hospital Newcastle for our client Mitie FM. Our service was carried out with no isolation to the busy hospital. The data collected gave a clean bill of health to the switchgear and with our data analysis service of previous testing by our engineers we could trend the internal quality of the electrical assets and if any early stages of any deterioration would cause issues

MET Group are proud to have completed the non isolation testing to Bloomberg Financial London for the third year. The works were ordered by our valued client Anord Mardix. The installation is nothing short of a work of art and is a pleasure to attend but even though the installation is of an high standard the people who have the responsibility to maintain it still ensure its tested every year because they expect nothing less than compliance and reliability. MET Group have now

MET Group have been awarded the contract to perform a live none isolation in-depth test for mobile giants JT global mobile phone services for the Jersey & Guernsey isles. The unique test MET Group will carry out will find any thermal & pre-thermal issue that have not caused any problems just yet but will if not identified. Our inspection will provide not just reliabilty but complainace with THE Electricty at Work Act regulations & guidance,, leaving no electrical certificate

MET Groups engineers carried out an in-depth test to the switchgear at Diodes Zetex Manchester There was no looking through IR windows as a basic test as the client wanted a full in-depth inspection of every connection and joint with all the technologies MET Group provide. With EAWR & HSE guidance & regulations we achieved the maximum inspection of all parts in the LV panels and also power quality data test with safety at the core of the inspection.

MET Group carried out our yearly ultrasonic inspection of the busbars at Datum Data Centre Farnborough for our client Anord Mardix. The energised inspection required no isolation to the busbar risers, no covers removed and no exposed live parts. Even with the busbar risers still energised our engineers can locate any loose connections, Arcing & Tracking to the Busbar Joints & Tapoff Boxes. providing reliability and preventing unexpected loss of critical power. Our services pr

MET Group carried out a full energised testing programme to 110 Cannon St London for our client Capital Property Maintenance Limited. The reliability and safety MET Groups testing process brings to any commercial or industrial building was identified by the team at Capital Property and implemented smoothly with no isolation and under working load so true data was recorded.

MET Group have carried out Energised Testing to the Leeds Civic Hall for our client Anord Mardix. The testing process was carried out to the switchgear providing reliability and compliance when isolation is not an option. MET Group work at all different sites & locations in the UK and Europe but it is always an added bonus to provide our services at a building that is listed as a Grade ll. We look forward to attending in 2024.

MET Group have been awarded from our client Mitie FM the maintenance and inspection of the critical busbars & tap offs at the Royal Victoria Hospital Newcastle for the next three years. The process will provide the reliability of the electrical distribution that is needed in all environments not just health care. The Mitie staff have been proactive in planning for these works as it achieves reliability and leaves nothing to chance. We look forward to being part of the PPM at

MET Group are delighted to have secured the energised testing at the London Stadium until 2026. The contract award follows on from our initial visit in 2022 and is supplied to us through our industry respected client Anord Mardix. The services MET Group carry out at the stadium will provide the highest standard of compliance & reliability.

This week we carried out our annual non intrusive electrical testing over at Michelin. Michelin opt to carry out our services each year, the testing is carried out under a full load, this way we get to see a true reflection of how the assets are performing. These are the tests we carried out to enable us to give complete peace of mind of the condition of the assets: Thermographic (Infrared) Imaging Ultrasonic Testing Power Quality Analysis Visual Inspection Predictive and Pro

EGGER are a new client of MET Group. We are able to test the main switch gear within the facilities under full load so no need for any unwanted down time. This allows Egger to operate business as usual while staying compliant. EGGER is a global family company founded in 1961 in Tyrol, Austria, where it is currently based. The company produces wood-based panel products. EGGER has 20 production sites globally located in Europe (Austria, Germany, France, Poland, United Kingdom,

Unilever have been a client of MET Group for many years and we are delighted so. We are able to test the main switch gear within the facilities under full load so no need for any unwanted down time. This allows Unilever to operate business as usual while staying compliant. MET Service® Preventative Maintenance Programme is performed annually, and while the facilities electrical distribution system is energised under normal load. Tests performed are: Ultrasonic Testing: Mea

METs engineers carried out ACB maintenance and testing to three different manufacturer’s circuit breakers at the same site & also a clean of the internal cabinet areas. Having the experience the correct manufactures testing equipment and being setup to carry out the critical service and testing works is down to the excellent planning by the ISS FM team, MET Groups engineers and MET’s electrical manager overseeing the project. The works tied in with other critical maintenance

MET Group visited the London stadium to carry out our energised testing service to the LV switchgear on behalf of our client Anord Mardix. The test was carried out under a full load. This is one of a number of prestige sites MET group are lucky enough to be a part of. For more information on how we can help you please get in touch.

MET Group Test from the Ground to the Clouds A full inspection of the LV electrical infrastructure was carried at 22 Bishopgate London. Along with our client BGIS FM the project & schedule was planned months in advance to maintain power at all times to one of the largest buildings in Europe while the LV distribution system was subjected to a real time under load analysis. MET Groups services can be deployed to all your electrical assets any time of the day without any loss of

Busbar Inspection and Maintenance, Where all Power is Critical. MET Group carried out a full inspection & maintenance service of the busbar system at the Royal Victoria Hospital Newcastle over a period of 8 months & eight MET Group engineers for Mitie Facilities Management. The process included all busbar joints inspected, tested and joints set to manufactures specification. All reports of each joint were issued to our client on our MET Pro software for our client to access a

MET None Isolation Service Preventative Maintenance Programme is recommended to be performed annually, and while the facilities electrical distribution system is energised under normal load. 1) True RMS Voltage and Current Testing: Capture and record the square root of the average square of the instantaneous magnitude of the voltage and current. This service is used to determine if the correct voltage and current is present to properly operate the Owner’s equipment and optimi

AN AIR LEAK SURVEY IS ONE OF THE EASIEST WAYS TO SAVE ENERGY FROM YOUR COMPRESSED AIR SYSTEM Compressed air system can be responsible for as much as 30% of a factory’s overall energy consumption. Wasting part of this energy through leaking compressed air pipework is simply throwing money away. Analysis your compressed air system is an excellent way to start the optimisation of your plant or manufacturing facility. One of the simplest and most effective checks to make on your